Oil Field & Gas Production

Calimulse® PR

Isopropylamine Branched Alkyl Benzene Sulfonate

Excellent high active emulsifier, wetting agent, penetrant and dispersant. Perfect for oil field, EP, textile and various agricultural applications. CFR 21 approved.

Calimulse® EM-22

Sodium Branched Dodecyl Benzene Sulfonate

Excellent emulsifier and wetting agent, perfect for EP, HI&I and Oil Field Applications. CR 21 approved.

Calimulse® EM-99

Branched Dodecyl Benzene Sulfonic Acid

Very high active sulfonic acid; excellent emulsifier, detergent and wetting agent. Perfect for agricultural, textile, HI&I and oil field applications. CFR 21 approved.

Calfoam® EA-682

Ammonium Decyl Ether Sulfate

Offers excellent foaming characteristics in highly electrolytic solutions, and hard/soft water environments. Perfect for wall board foaming applications.

Calfoam® SDS-30

Sodium Decyl Sulfate

Biodegradable foaming and wetting agent that foams well in brines and high electrolyte solutions. Lower foam profile than sodium lauryl sulfate. Excellent choice for firefighting foams and downhole applications.

Macat® Ultra CDO

Cocamidopropylamine Oxide

Macat® Ultra CDO is a 30% active, naturally plant derived coco (C12) amidopropyl dimethylamine oxide in water. Ultra CDO is an effective wetting agent, outstanding foam booster, grease cutter and low pH thickener. 

Caloxamine® LO

Lauramine Oxide

Great grease emulsifier, foam stabilizer and viscosity builder. Generates copious foam and mildness properties in many formulations. Bleach and peroxide stable. Biodegradable and derived from renewable natural resources.

Macat® AO-10

Decyl dimethylamine oxide

Macat® AO-10 is a 30% active, naturally plant derived decyl (C10) dimethylamine oxide in water. AO-10 is an effective wetting agent, outstanding foam stabilizer and grease cutter that is hypochlorite and acid stable. 

Maquat® MC1412-80E

n-Alkyl Dimethylbenzyl Ammonium Chloride

Maquat® MC1412 is a 80% active, EPA Registered active ingredient (MUP), n-Alkyl dimethylbenzyl ammonium chloride QAC uniquely optimized for outstanding efficacy for performance in water treatment and oil field applications, and for use in disinfectant and sanitizer formulations used in Hospitals, Institutions and Industry.

Mason® CS-448

Didecyldimethyl Ammonium Chloride

Mason® CS-448 is 80% active, naturally plant derived didecyldimethyl ammonium chloride formulated with ethanol for use as cationic surfactants in a wide range of applications, are characteristically low in color, low in odor and reliably consistent batch to batch. Use Mason® CS-448 in Cleaners, Degreasers, Textile, Sanitation Products, Oilfield and Personal Care. 

Mason® CS-445

Didecyldimethyl Ammonium Chloride

Mason® CS-445 is 50% active, naturally plant derived didecyldimethyl ammonium chloride for use as cationic surfactants in a wide range of applications, are characteristically low in color, low in odor and reliably consistent batch to batch. Use Mason® CS-445 in Cleaners, Degreasers, Textile, Sanitation Products, Oilfield and Personal Care.

Mason® CS-128

Alkyl dimethyl benzyl ammonium chloride

MASON® CS 128 is TSCA/CDSL listed 80% active alkyldimethylbenzyl ammonium chloride in a water/Isopropanol solution, with an alkyl distribution of C12 67%, C14 25%, C16 7%, C18 1%, for use in non-EPA/Canadian registered applications. 

Maquat® 4450-E

Didecyldimethyl Ammonium Chloride

Maquat® 4450E is a 50% active, EPA Registered active ingredient (MUP), naturally plant derived didecyldimethyl ammonium chloride QAC uniquely optimized for outstanding efficacy for performance in water treatment and oil field applications, and for use in disinfectant and sanitizer formulations used in Hospitals, Institutions and Industry.

Maquat® 4480-E

Didecyldimethyl Ammonium Chloride

Maquat® 4450E is a 80% active, EPA Registered active ingredient (MUP), naturally plant derived didecyldimethyl ammonium chloride QAC uniquely optimized for outstanding efficacy for performance in water treatment and oil field applications, and for use in disinfectant and sanitizer formulations used in Hospitals, Institutions and Industry.

Mason® CS-448I

Didecyldimethyl Ammonium Chloride

Mason® CS-448I is 80% active, naturally plant derived didecyldimethyl ammonium chloride formulated with isopropanol for use as cationic surfactants in a wide range of applications, are characteristically low in color, low in odor and reliably consistent batch to batch. Use Mason® CS-448I in Cleaners, Degreasers, Textile, Sanitation Products, Oilfield and Personal Care. 

Maquat® MC1412-50%

n-Alkyl Dimethylbenzyl Ammonium Chloride

Maquat® MC1412 is a 50% active, EPA Registeed active ingredient (MUP), n-Alkyl (50% C14, 40% C12, 10% C16) dimethylbenzyl ammonium chloride QAC uniquely optimized for outstanding efficacy for performance in water treatment and oil field applications, and for use in disinfectant and sanitizer formulations used in Hospitals, Institutions and Industry.

Macat® CAP-HS

Cocamidopropyl hydroxysultaine

Macat® CAP-HS is a 50% solids, naturally plant derived coco (C12) amidopropyl hydroxysultaine in water.  CAP-HS is an effective wetting and detergent agent, outstanding foam stabilizer, and is stable in strongly acid and alkaline systems. 

Macat® LFB

Capryl/Capramidopropyldimethyl Betaine

Macat® LFB is a 30% active, naturally plant derived caprylic/capric (C8/10) amidopropyl dimethyl glycine (betaine) in water. Macat® LFB has exceptional quality and mildness which allows for use in a variety of markets and applications. Personal Care,  HI&I  as wells as others.  

Macat® TAM-2 Betaine

Tallow Dihydroxyethyl Betaine

Macat® TAM-2 Betaine is a 35% solids, renewable carbon based tallow (C18) dihydroxyethyl betaine in water. Macat® Alkyl Betaines are classic zwitterion surfactants with good detergency and coupling performance, with exceptional mildness to skin. 

Mason® CS-428

Alkyldimethylbenzyl Ammonium Chloride

Mason® CS 428 is TSCA/CDSL listed 80% active, naturally plant derived alkyldimethylbenzyl ammonium chloride in a water/ethanol, or No-Flash water/ethylene glycol solution with an alkyl distribution of C14 50%, C12 40%, C16 10%, for use in non-EPA/Canadian registered applications. Use MASON® CS 428 as an anti-foam in Carpet Extraction Cleaners, an emulsifier in Degreasers, an anti-stat in Vehicle Cleaners or as a scour in Textile finishing plants to remediate mildew odor, and as an odor control agent in Sanitation Products. 

Masurf® FS-3020

Hydrocarbon Soluble Fluorosurfactant

Masurf® FS-3020 is characterized as 20% active fluoroaliphatic polymeric esters in a hydrocarbon solution. Masurf® FS-3020 is effective at very low concentrations, reducing surface tension of nonpolar organic solvents.

Masurf® FS-1400

Fluoroaliphatic Stearate Fluorosurfactant

Masurf® FS-1400 is characterized as a 100% active fluoroaliphatic stearate ester fluorosurfactant. Masurf® FS-1400 is a low-surface energy nonionic fluorosurfactant with the ability to contribute chemical and moisture resistance, oil and grease resistance, adhesion to low-energy surfaces, and to provide surface lubricity and soil and dirt resistance.

Masurf® FS-3330A

Fluoroaliphatic Phosphate Ester Fluorosurfactant

Masurf® FS-3330A is characterized as a 30% active C6-based ammonium fluoroaliphatic phosphate ester in an aqueous solution.  FS-3330A contributes exceptional oil resistance, rheology and surface modification, spreading and leveling properties to a wide range of systems from wood to stone.

Masurf® FS-910

Fluoroaliphatic Polyacrylate Oligomer Fluorosurfactant

Masurf® FS-910 is characterized as 11% active fluoroaliphatic polymeric esters in a hydrocarbon solution. Masurf® FS-910 is effective at very low concentrations, reducing critical surface tension of treated surfaces for durable water & oil repellency, and reducing solution surface tension of non-polar organic solvents.

Masurf® FS-130A

Ammonium C6-16 Perfluoroalkylethyl Phosphate

Masurf® FS-130A is characterized as a 28% active fluoroaliphatic phosphate ester fluorosurfactant in an aqueous solution. Masurf® FS-130A contributes exceptional oil resistance, rheology and surface modification, spreading and leveling properties to a wide range of systems from wood to stone.

Masurf® FS-130EB

Fluoroaliphatic Phosphate Ester Fluorosurfactant

Masurf® FS-130EB is characterized as a 30% active fluoroaliphatic phosphate ester fluorosurfactant in water/ethylene glycol monobutylether solution. Masurf® FS-130EB is an FDA approved, water dispersible fluoroaliphatic agent that imparts a high degree of oil and grease resistance to paper and paperboard.

Masurf® FS-920

Fluoroaliphatic Polyacrylate Oligomer Fluorosurfactant

Masurf® FS-910 is characterized as 22% active fluoroaliphatic polymeric esters in a hydrocarbon solution. Masurf® FS-910 is effective at very low concentrations, reducing critical surface tension of treated surfaces for durable water & oil repellency, and reducing solution surface tension of non-polar organic solvents.

Calsoft® AOS-1245

Sodium Alpha Olefin (C12) Sulfonate

High flash foamer in highly electrolytic solutions, & hard/soft water environments. Perfect for oil field down hole drilling applications.

Maquat® 2420-50%

Quaternary Ammonium Blend

Maquat® 2420-50% is a 50% active, EPA Registered active ingredient (MUP), 40% n-Alkyl (50% C14, 40% C12, 10% C16) dimethylbenzyl ammonium chloride/ 60% Didecyl ammonium chloride QAC uniquely optimized for outstanding efficacy for performance in water treatment and oil field applications, and for use in disinfectant and sanitizer formulations used in Hospitals, Institutions and Industry.

Maquat® 40-50

Quaternary Ammonium Blend

Maquat® 40-50 is a 50% active, EPA Registered active ingredient (MUP), 25% Dioctyl, 25% Didecyl, 50% Octyldecyl dimethyl ammonium chloride QAC uniquely optimized for outstanding efficacy for performance in water treatment and oil field applications, and for use in disinfectant and sanitizer formulations used in Hospitals, Institutions and Industry.

Maquat® 40:10

Quaternary Ammonium Blend

Maquat® 25:12 [EPA Supplemental Registration 10324-185]

Glutaraldehyde-Quat Blend

Maquat® 25:12 is an EPA registered synergistic blend of glutaraldehyde, didecyldimethyl ammonium chloride and n-alkyl (50%C14, 40%C12, 10%C16) dimethylbenzyl ammonium chloride in a water/ethanol solution. It was specifically designed and optimized for control of sulfate-reducing bacteria (SRB) that contribute to souring, the production of sulfide, and abiotic corrosion in Oil Field and Cooling Water systems, Gas Production and Transmission Pipelines and systems. 

Maquat® 2420-80%

Quaternary Ammonium Blend

Maquat® 2420-80% is a 80% active, EPA Registered active ingredient (MUP), 40% n-Alkyl (50% C14, 40% C12, 10% C16) dimethylbenzyl ammonium chloride/ 60% Didecyl ammonium chloride QAC uniquely optimized for outstanding efficacy for performance in water treatment and oil field applications, and for use in disinfectant and sanitizer formulations used in Hospitals, Institutions and Industry.

Maquat® SS50-PG

Alkyltrimethyl Ammonium Chloride

Maquat® SS50-PG is a 50% active, naturally plant derived alkyltrimethyl ammonium chloride in either water and isopropyl alcohol (SS-50 I), or in water and propylene glycol (SS-50 PG) with excellent substantive and anti-static properties for use in wide range of applications: wetting, cleaning, conditioning, softening, suspending and emulsification.

Maquat® Q-50S

Soy DMAPA Methyl Chloride

Maquat® Q-50S is a 50%, naturally plant derived soy amidopropyl ammonium chloride in water/isopropanol, for use as a cationic surfactant in a wide range of applications. Maquat® Q-50S is characteristically high in clarity and reliably consistent from batch to batch.

Maquat® TC76-50%

Quaternary Ammonium Blend

Maquat® TC76-50% is a 50% active, EPA Registered active ingredient (MUP), 99.6% n-Alkyl (60% C14, 30% C16, 5% C12, 5% C18) dimethylbenzyl ammonium chloride/ 0.4% n-Dialkyl (60% C14, 30% C16, 5% C12, 5% C18) methylbenzyl ammonium chloride QAC uniquely optimized for outstanding algaecidal efficacy for performance in commercial and recreational water treatment applications.

Maquat® 1010N-25:12

Glutaraldehyde / Didecyl Dimethyl Ammonium Chloride

Maquat® 1010N-25:12 is an EPA registered synergistic blend of 25.7% glutaraldehyde and 12.5% didecyl dimethyl ammonium chloride in a water / ethanol solution. Maquat® 1010N-25:12 was specifically designed and optimized for control of sulfate-reducing bacteria (SRB) that contribute to souring, the production of sulfide, and abiotic corrosion in oil field and cooling water systems, gas production and transmission pipelines and systems.

Pilot® D-300

4 Sulfophthalic Acid

Very special and unique sulfonic acid that finds application as a cataylst, corrosion inhibitor, chemical intermediate and is the primary electrolytic bath additive in the Duranodic® aluminum anodizing process.

Pilot® DABSA

Alkyl Aryl Sulfonic Acid

High molecular weight sulfonic acid for neutralization to speciality sulfonates.