Unpreserved Products
Pilot offers a wide range of unpreserved products, giving you flexibility in your personal care formulations to apply the preservative of your choice for total control over your product preservative package.
PRODUCTS
CHEMICAL OVERVIEW
Calfoam® ES-603
Sodium Lauryl Ether Sulfate (3 Mole EO), 60%
Good flash foamer, used in medium to high pH products, contains alcohol solvent.
Also available as Mass Balanced (MB) for formulators choosing to use only RSPO (Roundtable on Sustainable Palm Oil) materials.
SDS | Tech Data Sheet
Calfoam® ES-702
Sodium Lauryl Ether Sulfate (2 Mole EO), 70%
Calfoam® ES-702 is a sodium salt of lauryl alcohol ethoxy sulfate containing an average of 2 moles of ethylene oxide. Also available as Mass Balanced (MB) for formulators choosing to use only RSPO (Roundtable on Sustainable Palm Oil) materials.
SDS | Tech Data Sheet
Calfoam® ES-702 10 MAX
Sodium Lauryl Ether Sulfate (2 Mole EO), 70%
Calfoam® ES-702 10 MAX is a sodium salt of lauryl alcohol ethoxy sulfate containing an average of 2 moles of ethylene oxide with a 1,4-Dioxane level below 10ppm.
Also available as Mass Balanced (MB) for formulators choosing to use only RSPO (Roundtable on Sustainable Palm Oil) materials.
SDS | Tech Data Sheet
Calfoam® ES-702 5 MAX
Sodium Laureth Sulfate
Calfoam® ES-702 5 MAX is a 70% active solution of sodium lauryl ether sulfate that contains an average of 2 moles of ethylene oxide and a maximum of 5 ppm (as is) 1,4-Dioxane.
Also available as Mass Balanced (MB) for formulators choosing to use only RSPO (Roundtable on Sustainable Palm Oil) materials.
SDS | Tech Data Sheet
Calfoam® ES-703
Sodium Lauryl Ether Sulfate (3 Mole EO)
Calfoam® ES-703 is a 70% active solution of sodium lauryl ether sulfate that contains an average of 3 moles of ethylene oxide. Calfoam® ES-703 is an anionic surfactant of choice for personal care and HI&I applications. Calfoam® ES-703 is CleanGredients® Listed, which means it has been pre-approved by the U.S. EPA to meet the criteria of their Safer Choice Standard. This certification may streamline the approval process for EPA’s Safer Choice program, getting a formulator’s Safer Choice labeled product to market faster.
Also available as Mass Balanced (MB) for formulators choosing to use only RSPO (Roundtable on Sustainable Palm Oil) materials.
SDS | Tech Data Sheet
Calfoam® SLS-95
Sodium Laureth Sulfate
Calfoam® SLS-95 is a naturally derived, vegetable based 95% active sodium lauryl sulfate in granular form. Calfoam® SLS-95 is an anionic surfactant that produces copious foam and a rich lather. SLS-95 is made using a state-of-the-art sulfation technology, resulting in a high-quality product.
Also available as Mass Balanced (MB) for formulators choosing to use only RSPO (Roundtable on Sustainable Palm Oil) materials.
SDS | Tech Data Sheet
Calsoft® AOS-40 HP
Sodium C14-16 Olefin Sulfonate
Calsoft® AOS-40 HP is a 40% active solution of sodium C14 16 alpha olefin sulf onate that offers the advantages of high foaming power, good emulsification, skin mildness and excellent lime soap dispersion for use in personal care and HI&I applications.
SDS | Tech Data Sheet
Macat® AO-10
Decyl dimethylamine oxide
Macat® AO-10 is a 30% active, decyl (C10) dimethylamine oxide in water. AO-10 is an effective wetting agent, outstanding foam stabilizer and grease cutter that is hypochlorite and acid stable.
SDS
Macat® AO-12
Lauryl dimethylamine oxide
Macat® AO-12 is a 30% active lauryl (C12) dimethylamine oxide in water. AO-12 is an effective wetting agent, outstanding foam booster and grease cutter that is hypochlorite and acid stable.
SDS | Tech Data Sheet
Macat® AO-12-2
Dihydroxyethyl cocamine oxide
Macat® AO-12-2 is a 30% active dihydroxyethyl cocamine oxide in water. AO-12-2 provides viscosity control, and is an outstanding foam booster and foam stabilizer.
Macat® AO-14
Myristyl dimethylamine oxide
Macat® AO-14 is a 30% active, myristyl (C14) dimethylamine oxide in water. AO-14 provides viscosity control, and is an outstanding foam booster and grease cutter that is chlorine and acid stable.
SDS
Macat® AO-14 LFA
Myristyl Dimethylamine Oxide
Macat® AO-14 is a 30% active myristyl (C14) dimethylamine oxide in water. AO-14 provides viscosity control, and is an outstanding foam booster and grease cutter that is chlorine and acid stable. Macat® AO-14 contains no solvents or VOCs.
SDS
Macat® AO-18-1
Oleyl dimethylamine oxide
Macat® AO-18-1 is a 30% active, Oleamine Oxide with outstanding foam boosting and grease cutting properties.
SDS | Tech Data Sheet
Macat® Ultra CG
Cocamidopropyl Betaine
Macat® Ultra CG is a mild foaming cocamidopropyl betaine surfactant that builds excellent viscosity with anionic surfactants in liquid formulations. Detergency and foaming characteristics are generally unaffected by hard water. Macat® Ultra CG can add humectancy to many formulations.
SDS | Tech Data Sheet
Maquat® CETAC-30
Cetyl trimethyl ammonium chloride
Maquat® CETAC-30 is a 30% active, cetyl trimethyl ammonium chloride in water with excellent substantive and anti-static properties for use in wide range of markets including: personal care, textiles and paper. CETAC-30 imparts exceptional wetting, cleaning, conditioning, softening, suspending and emulsification.
SDS | Tech Data Sheet
Maquat® SC-1632
A blend of cetearyl alcohol, PEG-40 castor oil and Stearyl dimethyl benzyl ammonium chloride
Maquat® SC-1632 is characterized as a self-emulsifying, stearalkonium chloride with cetearyl alcohol and PEG 40 Castor Oil. Developed for ease of use, SC-1632 is an industry standard conditioning agent, with consistent low color and low odor made from the highest quality raw materials for personal care product applications.
Maquat® SC18-25
Stearalkonium Chloride
Maquat® SC18-25 is characterized as a stearyl dimethylbenzyl ammonium chloride available in either paste or flake form. Maquat® SC18-25 is a high quality, low color cationic surfactant with excellent substantive properties for use in personal care formulations, textiles and paper.
SDS | Tech Data Sheet
Maquat® SC18-85
Stearyl Dimethylbenzyl Ammonium Chloride
Maquat® SC18-85 is characterized as a stearyl dimethylbenzyl ammonium chloride available in either paste or flake form. SC18-85 is a high quality, low color cationic surfactant with excellent substantive properties for use in personal care formulations, textiles and paper.
SDS | Tech Data Sheet
Maquat® SL-5
Dihydroxypropyl PEG-5 linoleammonium chloride
Maquat® SL-5 is a 40% solution of dihydroxypropyl PEG-5 linoleammonium chloride in water. With its unique substantive, lubricating, detangling, anti-static and anionic compatible foaming properties, SL-5 is a superior product for use in wide range of products including: 2-in-1 shampoos, restorative conditioners, conditioning haircolor, crèmes and lotions.